Bitcoin’s computing power could rise  30% by 2027 – Is BTC mining profitable anymore?

Bitcoin miners should be prepared for a challenging season. The cost of mining will rise a year before the second halving, which will be in 2028. According to reports, Bitcoin’s computing capacity is predicted to expand by around 30% by 2027.

Bitcoin’s hashrate, which is the amount of computing power needed to mine a block in a proof-of-work blockchain, is on track to reach 1 zettahash per second before the next BTC halving event in about 3.5 years. This will put miners under a lot of pressure to find cheap power deals and better equipment.

Even if it only goes up by 20% a year, the average hashrate could hit that level by 2027, which is equal to 1,000 exahash per second (EH/s). Since 2020, it’s grown by an average of 65% per year, and data shows that it’s now around 787 EH/s on a seven-day moving average.

Notably, the hashrate is a key factor in how much BTC miners can make. The cost of energy goes up as the hashrate goes up. It also has something to do with network security, which has grown by 56% in the last year.

How bad can Bitcoin mining get?

Let’s look at a case scenario: After the block awards were cut in half in April 2024 to 450 BTC per day, growth sped up in the second half of that year. This was because miners were making less money. Some miners couldn’t make it by mining BTC alone because of how tight it got. Some even chose to buy BTC on the open market instead.

At 1 ZH/s, miners will need to be more inventive to survive and adjust to a more tough market. Unfortunately, the hashrate could have already reached 1 ZH/s for a single block. A reading from a single block, however, is inaccurate due to the probabilistic nature of mining, block time variations, and short-term network volatility. To account for outliers and reliability, most industries use at least a seven-day moving average.

#Bitcoin #hashrate hit 1 ZH for the first time pic.twitter.com/3yIYEmUGeg

— USDIRR (@USD_IRR) January 3, 2025

Not only is hashrate increasing, but so is the difficulty of mining a block. Since October, the blockchain has witnessed seven straight positive difficulty changes, with the current total at 109.78 trillion. 

Difficulty is adjusted every 2,016 blocks and recalibrated for blocks mined every 10 minutes. Additionally, the network last experienced seven consecutive positive adjustments after China outlawed mining in 2021 when the hashrate decreased by 50%. This time, however, hashrate and difficulty are moving together.

Is Bitcoin Mining profitable anymore? Reduced costs and improved efficiency

In the early stages of Bitcoin, mining necessitated relatively straightforward computational capacity. Nevertheless, as the network expanded and competition intensified, more advanced strategies became increasingly necessary. 

Mining operations are now more compelled than ever.  Identifying methods to maintain profitability in the face of the increasing cost of Bitcoin production has become challenging. Miners employ state-of-the-art infrastructure, hardware, and software to optimize returns and expedite processes.

Miners should prioritize improving hashrates and decreasing idle time for mining hardware to facilitate quicker block confirmations. This can also increase mining efficiency. 

Additionally, these enhancements could result in increased profitability by guaranteeing that each piece of equipment operates at its optimum capacity. This is in contrast to traditional methods in which hardware frequently underperforms. 

For example, spreading work among several mining rigs lowers energy use and keeps gear from getting too hot. This can make hardware last longer. This can keep costs low, especially since energy prices change all the time.  

In addition, artificial intelligence (AI) is rapidly revolutionizing businesses around the world, and Bitcoin mining is no exception. AI-powered algorithms examine vast datasets created by mining operations to improve performance and cut expenses. 

These algorithms can forecast swings in Bitcoin production costs, track hardware performance, and automatically adjust mining techniques in real-time.  Also, AI can anticipate when maintenance is required, reducing the risk of costly downtime.

From Zero to Web3 Pro: Your 90-Day Career Launch Plan